RalfTheDog
Apr 14, 09:56 PM
Rats, sinking ships and all that. </troll>
Kaafir
Oct 27, 01:08 PM
And so it begins - this is the first of only many apps that are going to be written to work with Intel chip sets only, I'm afraid. I am, however, somewhat taken aback that they appeared this early from a major software company.
Perhaps there have been others, but I've not seen anything myself released which didn't have a PPC version available or was UB until now.
Perhaps there have been others, but I've not seen anything myself released which didn't have a PPC version available or was UB until now.
63dot
Mar 16, 12:23 PM
While I agree the U.S. makers have a large share of the domestic market for pickups etc in the long term they are up against it the Japanese,Australian and to a smaller extent South African manufacturers turn out a much better quality product.I would think the only way for the U.S. manufacturers to survive is by partnering the leading overseas producers and use their technology.
I hope in the long term, US companies partner with many other companies. Yes, it's true foreign companies are ahead, but not that far ahead, imho.
A lot of people blame some of the areas surrounding Detroit's auto industry and areas around Michigan and neighboring states with the decrease in American auto quality and hard times that hit. While this is true to an extent, a large part of the entire region's economic hardship goes back before the 1980s when there was very little GOP support for the farmers in those states.
Even when Ronald Reagan and both Bushes were largely popular almost everywhere else and could find strongholds in nearly every state, the party didn't get the votes in Michigan, Wisconsin, Illinois, and Ohio up to where the party expected.
Too many people blame America for making bad cars and thus directly affecting that big section of the Midwest, but by the 1990s the American cars were not really that bad but a lot of the other economies didn't recover. It was far more for the lack of support for farmers there from one of the two major parties.
It's far too much for any single link, or book to show why that section of the Midwest has been more democratic, but the auto industry and its decline is still a smaller segment of the Midwest's economy than agriculture.
By losing a lot of support from that industry in the northern Midwest pretty much cost the GOP the elections in 1976, 1992, 1996, and 2008. That being said, losing the majority of the South cost the democrats the election in 1980, 1984, 1988, 2000, and 2004. It is a wise move for the president to support those states in the Midwest which are hurting and prop up both the auto industry and agriculture industries. If he fails to do so, he could lose to a Republican in 2012. There's no doubt California and New York with be blue states, and Texas and Utah will be red states, but Michigan/Wisconsin/Illinois/Ohio and maybe Indiana could be very close one way or the other.
I hope in the long term, US companies partner with many other companies. Yes, it's true foreign companies are ahead, but not that far ahead, imho.
A lot of people blame some of the areas surrounding Detroit's auto industry and areas around Michigan and neighboring states with the decrease in American auto quality and hard times that hit. While this is true to an extent, a large part of the entire region's economic hardship goes back before the 1980s when there was very little GOP support for the farmers in those states.
Even when Ronald Reagan and both Bushes were largely popular almost everywhere else and could find strongholds in nearly every state, the party didn't get the votes in Michigan, Wisconsin, Illinois, and Ohio up to where the party expected.
Too many people blame America for making bad cars and thus directly affecting that big section of the Midwest, but by the 1990s the American cars were not really that bad but a lot of the other economies didn't recover. It was far more for the lack of support for farmers there from one of the two major parties.
It's far too much for any single link, or book to show why that section of the Midwest has been more democratic, but the auto industry and its decline is still a smaller segment of the Midwest's economy than agriculture.
By losing a lot of support from that industry in the northern Midwest pretty much cost the GOP the elections in 1976, 1992, 1996, and 2008. That being said, losing the majority of the South cost the democrats the election in 1980, 1984, 1988, 2000, and 2004. It is a wise move for the president to support those states in the Midwest which are hurting and prop up both the auto industry and agriculture industries. If he fails to do so, he could lose to a Republican in 2012. There's no doubt California and New York with be blue states, and Texas and Utah will be red states, but Michigan/Wisconsin/Illinois/Ohio and maybe Indiana could be very close one way or the other.
Goldinboy17
Mar 24, 05:08 PM
I just got off the phone with sale rep, and all they have is 32gb and 64gb left. When asked about the price, she said $500 for 32gb (??). I mentioned the article and she still said $500. Weird? Is there an official link to this somewhere on the verizon site, as all I can see is it bundled with mifi @ 429.99 (16gb).
$299 is definitely a steal!
I haven't been able to find a SINGLE store that has the 16GB model. I've searched everywhere throughout the city and east bay. Anyways, all I've called have said the iPads are $299/$399/$499 with no contract.
$299 is definitely a steal!
I haven't been able to find a SINGLE store that has the 16GB model. I've searched everywhere throughout the city and east bay. Anyways, all I've called have said the iPads are $299/$399/$499 with no contract.
more...
apolloa
Apr 21, 02:13 PM
So as we all know we'll get the A5 chip but don't know what clock speeds, we will get a design much like the iPhone 4 which IMO is fantastic news, a pretty much confirmed 8mpx camera unit from Sony which again is just fantastic news, so long as Apple have learnt to protect the lens a bit!!
And we are all expecting to have 64gb version and lets hope the 32gb takes the place and price point of the 16gb.
And now this brilliant news, and I am going to state I bet one of those developers is Gameloft and I bet it's developing it's Unreal Engine based game for it!!!! Black Ops running on the iPhone 5 and Unreal Engine anyone? Sounds truthful to me :)
I'm thinking the next iPhone will be a keeper for a few years, well 2 anyway haha.
And we are all expecting to have 64gb version and lets hope the 32gb takes the place and price point of the 16gb.
And now this brilliant news, and I am going to state I bet one of those developers is Gameloft and I bet it's developing it's Unreal Engine based game for it!!!! Black Ops running on the iPhone 5 and Unreal Engine anyone? Sounds truthful to me :)
I'm thinking the next iPhone will be a keeper for a few years, well 2 anyway haha.
colmaclean
Mar 26, 05:20 PM
Is this a still from the next series of Curb Your Enthusiasm?
more...
lordonuthin
Apr 16, 06:56 PM
do you ever use these stats? (http://folding.extremeoverclocking.com/team_summary.php?s=&t=3446)
you can see other individuals also. and see how you rank against them.
I do now, for some reason it takes me a while to understand when I look at it.
yes we do need more users. 1,000 users @ 100 ppd is 100,000 ppd. whiterabbit is doing almost that by himself!
Ha ha, yes we could use some more folders.
you can see other individuals also. and see how you rank against them.
I do now, for some reason it takes me a while to understand when I look at it.
yes we do need more users. 1,000 users @ 100 ppd is 100,000 ppd. whiterabbit is doing almost that by himself!
Ha ha, yes we could use some more folders.
MacCoaster
Sep 20, 05:50 PM
Originally posted by dricci
P4s can't go Dual. It's sorta like the G3, it's just not designed to do that. It wouldn't work.
That is what the Pentium 4 XEON is for. So yes, P4s can go dual, in the Xeon configuration.
Edit: Hell, it can do 4-way or more. Quad G4 Macs? In your dreams...
P4s can't go Dual. It's sorta like the G3, it's just not designed to do that. It wouldn't work.
That is what the Pentium 4 XEON is for. So yes, P4s can go dual, in the Xeon configuration.
Edit: Hell, it can do 4-way or more. Quad G4 Macs? In your dreams...
more...
redeye be
Jun 10, 03:37 AM
Back at my computer, finally.
A lumbago kept me laying down in front of my tv since sunday. sucks.
Thx for helping out with the user questions.
Time to do some work on the widget :D
A lumbago kept me laying down in front of my tv since sunday. sucks.
Thx for helping out with the user questions.
Time to do some work on the widget :D
Kengineer
Sep 22, 06:33 PM
Anyone know whether or not the IMACs are going to be updated in the next few months?
I am starting to look for a new computer (switching from a PC to a MAC) and trying to get a handle on when possible updates might be released if any. I would hate to buy in the next couple months when all I had to do was wait until the end of the year.
Thanks for the help...:)
I am starting to look for a new computer (switching from a PC to a MAC) and trying to get a handle on when possible updates might be released if any. I would hate to buy in the next couple months when all I had to do was wait until the end of the year.
Thanks for the help...:)
more...
Doylem
Mar 18, 05:25 AM
Get lost in the world of gear. Spend your time reading about the specs of forthcoming cameras and lenses, instead of actually taking pics. Denigrate the gear you have; fantasise about a fancier camera. That would make you a better photographer, surely? ;)
thatisme
Mar 29, 10:58 AM
sorry man.. i just cannot help you...
you are beyond what we, on planet earth, define as normal...
I tried.. i really tried..please read carefully what i wrote..
the "cropping" was referred to only one camera body.. just to illustrate you the whole crop size thing.
Now on the top of my quote you write to show you an exif intact photo with an EFs and EF lens..
I cannot do that as I don't have my cam but I will have it back on the weekend and I actually own a dx and FX lens (EF-s and EF) in Nikon land that overlap at 24mm, so I CAN show you..
to everyone else: Can someone do this before then to show our poor misguided soul what is going on?.
As far as Nikon goes: The reason was the F- Mount.. High speed crop is a byproduct. the D700 does not have it and some other don't either but they all MOUNT DX lenses in crop mode AND full frame mode.
F Mount has not changed since the 1950's and the reason why they kept it was that they can let people use older lenses.. Canonians for example got forced to EF in the 80's if I am not mistaken.
Now drop it.. you lost.
I have not made claims on Nikon mounts. Only about the crop mode. I used to shoot Nikon gear. So I am familiar with the cameras and the lenses. I now shoot Canon gear, ok. I am also very familiar with the lenses and gear.
Every time this subject comes up, the general response is... "but if you crop"... which is what you brought into the conversation. The fact is if you want a true comparison, you cannot crop. As from the example in #27 or whatever post it was with the 5D image, yes, you could crop it and get a 1.6 FOV. BUT, that is NOT what the lens is transmitting (see the black corners). Is the actual FOV the same? Again, who gives a flying flip. What is the true definition of FOV? Again, Does it matter to the average Joe with a camera? NO. It's the resulting image that matters, and if you got those black corners in your pictures, would you be happy that in order to get a usable image you ..."just have to crop"?
At the end of the day, the debate is... is the IMAGE the same or not. Who gives a flying flip about the FOV. All that matters is do you have the same subject in the frame, and the resulting print. If your print has more subject in the frame than another, then the image is DIFFERENT (and yes, this can be achieved with the same focal length lens, different sensor sized cameras). Again, see #27.
As far as Nikon goes: The reason was the F- Mount.. High speed crop is a byproduct. the D700 does not have it and some other don't either but they all MOUNT DX lenses in crop mode AND full frame mode.
So do this experiment for fun.... Mount your F mount lens to your Nikon body. Set your Focal length. Mount to tripod. Shoot an image. Look at your results
Now, take that same setup and simply change your setting to your DX setting (1.6 or 1.5.. I forget for Nikon). Look at your results.
Are the images different or the same? What changed? The lens is the same focal length on both images, but your sensor capture are has changed. The DX mode only records the center of the image circle.
Now, Im fairly certain the next logical argument you will bring up.... IF you change the physical dimensions of the resulting images because of the number of megapixels and file size (dimensions)...... This will bring us to another debate about the merits of up-rezzing or down-sampling an image. Again, not an Apple-to-Apple comparison.
you are beyond what we, on planet earth, define as normal...
I tried.. i really tried..please read carefully what i wrote..
the "cropping" was referred to only one camera body.. just to illustrate you the whole crop size thing.
Now on the top of my quote you write to show you an exif intact photo with an EFs and EF lens..
I cannot do that as I don't have my cam but I will have it back on the weekend and I actually own a dx and FX lens (EF-s and EF) in Nikon land that overlap at 24mm, so I CAN show you..
to everyone else: Can someone do this before then to show our poor misguided soul what is going on?.
As far as Nikon goes: The reason was the F- Mount.. High speed crop is a byproduct. the D700 does not have it and some other don't either but they all MOUNT DX lenses in crop mode AND full frame mode.
F Mount has not changed since the 1950's and the reason why they kept it was that they can let people use older lenses.. Canonians for example got forced to EF in the 80's if I am not mistaken.
Now drop it.. you lost.
I have not made claims on Nikon mounts. Only about the crop mode. I used to shoot Nikon gear. So I am familiar with the cameras and the lenses. I now shoot Canon gear, ok. I am also very familiar with the lenses and gear.
Every time this subject comes up, the general response is... "but if you crop"... which is what you brought into the conversation. The fact is if you want a true comparison, you cannot crop. As from the example in #27 or whatever post it was with the 5D image, yes, you could crop it and get a 1.6 FOV. BUT, that is NOT what the lens is transmitting (see the black corners). Is the actual FOV the same? Again, who gives a flying flip. What is the true definition of FOV? Again, Does it matter to the average Joe with a camera? NO. It's the resulting image that matters, and if you got those black corners in your pictures, would you be happy that in order to get a usable image you ..."just have to crop"?
At the end of the day, the debate is... is the IMAGE the same or not. Who gives a flying flip about the FOV. All that matters is do you have the same subject in the frame, and the resulting print. If your print has more subject in the frame than another, then the image is DIFFERENT (and yes, this can be achieved with the same focal length lens, different sensor sized cameras). Again, see #27.
As far as Nikon goes: The reason was the F- Mount.. High speed crop is a byproduct. the D700 does not have it and some other don't either but they all MOUNT DX lenses in crop mode AND full frame mode.
So do this experiment for fun.... Mount your F mount lens to your Nikon body. Set your Focal length. Mount to tripod. Shoot an image. Look at your results
Now, take that same setup and simply change your setting to your DX setting (1.6 or 1.5.. I forget for Nikon). Look at your results.
Are the images different or the same? What changed? The lens is the same focal length on both images, but your sensor capture are has changed. The DX mode only records the center of the image circle.
Now, Im fairly certain the next logical argument you will bring up.... IF you change the physical dimensions of the resulting images because of the number of megapixels and file size (dimensions)...... This will bring us to another debate about the merits of up-rezzing or down-sampling an image. Again, not an Apple-to-Apple comparison.
more...
tktaylor1
Apr 27, 07:34 PM
It should not matter what "I think" about Trump as it relates to your vote. But, I think you are trying to get a deeper sense of the candidate by asking others, which seems both reasonable yet misguided to me. My suggestion is that, at the end of the day, vote your conscience based on what HE SAYS and DOES and not what others interpret. You have a moral compass, use it.
I asked this because I am new to politics and want to learn more about it. When people answer this question most of the time they have reasons to back it up like things the candidate has done in the past. I am just trying to learn more about politics is all. And it starts a good thread full of information for me to read.
I asked this because I am new to politics and want to learn more about it. When people answer this question most of the time they have reasons to back it up like things the candidate has done in the past. I am just trying to learn more about politics is all. And it starts a good thread full of information for me to read.
coleg
Mar 22, 12:04 PM
49 keys right? try an Alesis Ion Gig Bag. This: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=41403&item=7309830009&rd=1&ssPageName=WDVW
I have an M-Audio Radium 49. It's a midi-controller keyboard with 49 keys, and it fits in this bag perfectly. The bag is form fit very well and has an extra pouch for adapter and audio cords.
That was the only one on Ebay I found. But I'm sure you could find one of these bags for under $50 somewhere.
Good luck.
I have an M-Audio Radium 49. It's a midi-controller keyboard with 49 keys, and it fits in this bag perfectly. The bag is form fit very well and has an extra pouch for adapter and audio cords.
That was the only one on Ebay I found. But I'm sure you could find one of these bags for under $50 somewhere.
Good luck.
more...
redeye be
Jun 13, 03:59 AM
My back is still killing me but at least i can sit for more than 30 minutes right now, expect the widget to change this week.
welcome back to folding dubbz!
As for the tracking of other folders and multiple instances.
It is indeed, as Flying Llama pointed out, an apple thing with the prefs. You should however be able to work around this by duplicating the widget in your library and giving it a different name. This will let you run different widgets in stead of different instances. No idea on the performance hit though, not at home/mac right now.
A 'target' option is in the make. It will let you track 3 folders or teams of your choice in one widget. Now how cool is that ;).
welcome back to folding dubbz!
As for the tracking of other folders and multiple instances.
It is indeed, as Flying Llama pointed out, an apple thing with the prefs. You should however be able to work around this by duplicating the widget in your library and giving it a different name. This will let you run different widgets in stead of different instances. No idea on the performance hit though, not at home/mac right now.
A 'target' option is in the make. It will let you track 3 folders or teams of your choice in one widget. Now how cool is that ;).
lhshockey24
Mar 11, 03:20 PM
20 In line at the Best Buy in Flower Mound. I wonder what the other Best Buys look like now that people are getting off work.
more...
scem0
Sep 15, 09:19 AM
Originally posted by atomwork
Hi scem0,
how do you do this to keep up with the programs if you switch every couple years from one system to the other. And isn't it confusing in your workflow or are u just a consumer user. If so then the power ain't matter my friend.
Cheers,
Dave
I am definitelynot a 'power user', but I am a hardcore gamer. And when I see a friend with a year old PC playin Warcraft with less jumpiness then my 6 month old powermac, it makes me want to switch. Power does matter to me, and you cant get much power for the amount of money I have when it comes to computers from apple.
Hi scem0,
how do you do this to keep up with the programs if you switch every couple years from one system to the other. And isn't it confusing in your workflow or are u just a consumer user. If so then the power ain't matter my friend.
Cheers,
Dave
I am definitelynot a 'power user', but I am a hardcore gamer. And when I see a friend with a year old PC playin Warcraft with less jumpiness then my 6 month old powermac, it makes me want to switch. Power does matter to me, and you cant get much power for the amount of money I have when it comes to computers from apple.
katie ta achoo
Sep 18, 01:34 AM
Yes, but you only get 5 points because you cheated. ;)
It's still half credit-- if it's good enough for a 3 on the AP exam, it's good enough for me!! :)
It's still half credit-- if it's good enough for a 3 on the AP exam, it's good enough for me!! :)
AmTechFox
Nov 17, 04:53 PM
Good for him! :p:apple:
erockerboy
Oct 26, 09:03 PM
Works great! Love it!
CalBoy
Apr 27, 08:49 PM
I asked this because I am new to politics and want to learn more about it. When people answer this question most of the time they have reasons to back it up like things the candidate has done in the past. I am just trying to learn more about politics is all. And it starts a good thread full of information for me to read.
If you are new to politics and want to honestly learn more about it, you should first figure what you do and don't know.
The first and most basic thing to learn is the fundamentals of government, elections, the law, and all of the history that comes along with it. If you haven't been in school for a while (or taken a government class in a while), a refresher will always help.
After that, I recommend reading Hardball by Chris Matthews. It's a great look into how politicians run, strategize, and win elections. It will also give any voter a lot of insight into how politicians act in the US because of how modern politics works.
If you are new to politics and want to honestly learn more about it, you should first figure what you do and don't know.
The first and most basic thing to learn is the fundamentals of government, elections, the law, and all of the history that comes along with it. If you haven't been in school for a while (or taken a government class in a while), a refresher will always help.
After that, I recommend reading Hardball by Chris Matthews. It's a great look into how politicians run, strategize, and win elections. It will also give any voter a lot of insight into how politicians act in the US because of how modern politics works.
aughsum
May 3, 09:20 AM
If I had to guess why some white iPhone 4s look thicker, I'd say it's because eBay scammers bought aftermarket white parts, put them on black iPhones and sold them as factory white iPhones.
/common sense.
/common sense.
maroontiger2k9
Mar 23, 04:20 PM
Thats a tough one...while a non-apple device will sell better with an airplay compatible badge, its hard to argue that the opposite will drive more sales of iPads. Sorry folks, pay the Apple.
this is a brilliant idea... but honestly, i would let competitors struggle for another 8 years before i let AIRPLAY on other devices...
b/c this could potentially generate interest in competitors... or it could allow apple to pull profits from competitors who will ultimately FAIL to generate enough interest
think about it... other competitors would probably get their devices integrated with itunes so that they can HOME SHARE AIRPLAY to their phones/tablets/etc..
apple will make a profit for just providing access to airplay.... the problem is if if the competitor becomes more popular or as popular as apple... would the competitor throw apple a bone?! i dont think so
this is a brilliant idea... but honestly, i would let competitors struggle for another 8 years before i let AIRPLAY on other devices...
b/c this could potentially generate interest in competitors... or it could allow apple to pull profits from competitors who will ultimately FAIL to generate enough interest
think about it... other competitors would probably get their devices integrated with itunes so that they can HOME SHARE AIRPLAY to their phones/tablets/etc..
apple will make a profit for just providing access to airplay.... the problem is if if the competitor becomes more popular or as popular as apple... would the competitor throw apple a bone?! i dont think so
jbembe
Oct 9, 10:19 PM
In fact, DVD pricing is not the most important factor for Walmart and I suspect Target as well. Both companies employ sophisticated marketing techniques to draw customers into the store and get them to part with more money than they originally intended to spend. Brand-name promotions, item placements and even Walmart's "don't ask, don't tell" return policies are examples. The use of loss-leaders, selling products at a small loss, has proven to be one of the most powerful customer draws. DVDs are the numero-uno loss leader draw of most Walmarts, particularly those in the broad midsection of the country where it's often difficult to find a video rental store, much less a Tower, Borders or Virgin Atlantic store. I recently spent the summer in the Hill Country of Texas and became quite familiar with the Friday evening surge when customers would stream into a Walmart to pick up a DVD for the weekend and then decide to do a little additional shopping "seein' as they was there." I think the stores are rightfully fearful of the loss in foot traffic and the consequential loss of impulse purchases if movie downloads become popular. For the same reason, simply openning up an online store will not insulate them from losses since the profits accrued from DVD sales don't generally arise from the DVDs themselves, but from the additional shopping that is all but inevitable once you enter the store.
Yep, it's similar in Best Buy and other places with the weeks newest CD releases. Normally a few CDs are on a really good sale and others are not so competitively priced. Good thing I can control my impulses... for the most part.
Anyway, unlike my CD collection, I would be quite happy with a terrabyte unit to store all of my movies so I could just scroll through some list on the remote and playback any given movie for the evening-- or download something new. When the iService gives that to us, it will be quite nice.
Yep, it's similar in Best Buy and other places with the weeks newest CD releases. Normally a few CDs are on a really good sale and others are not so competitively priced. Good thing I can control my impulses... for the most part.
Anyway, unlike my CD collection, I would be quite happy with a terrabyte unit to store all of my movies so I could just scroll through some list on the remote and playback any given movie for the evening-- or download something new. When the iService gives that to us, it will be quite nice.
No comments:
Post a Comment